Here is an easy way— factory reset, for
you to fix your Ford VCM II when it becomes inoperable. For example, VCM II will not boot-up
properly, VCM II LED’s not functioning properly, etc.
you to fix your Ford VCM II when it becomes inoperable. For example, VCM II will not boot-up
properly, VCM II LED’s not functioning properly, etc.
1. Shut down
the IDS application if it is running.
the IDS application if it is running.
2. Disconnect
the VCM II DLC cable from the vehicle.
the VCM II DLC cable from the vehicle.
3. Disconnect
the VCM II USB cable from the VCM II and PC.
the VCM II USB cable from the VCM II and PC.
4. Remove the
rubber boot on the VCM II that is opposite the DLC connector to expose the
Recovery Mode Switch.
rubber boot on the VCM II that is opposite the DLC connector to expose the
Recovery Mode Switch.
5. Start the
IDS application.
IDS application.
6. Press and hold the plastic tab. Do not
release the tab until Step 9.
release the tab until Step 9.
7. Connect the VCM II to the PC using the
USB cable.
USB cable.
8. Wait for the VCM II’s Power LED to
remain on and for the unit to beep.
remain on and for the unit to beep.
9. Release the plastic tab – the VCM II
will be in Recovery Mode.
will be in Recovery Mode.
10. The IDS pop-up window below will appear
notifying the user that a new version of VCM II software is available. Select
the Tick button to update the VCM II software.
notifying the user that a new version of VCM II software is available. Select
the Tick button to update the VCM II software.
11. Follow the
IDS on-screen instructions to complete the software installation.
IDS on-screen instructions to complete the software installation.
Hope it help you guy out.