Mercedes Benz SCN Coding must be performed
if the Sprinter PSM (Parameterizable
special module) had not been installed. SCN coding should be applied together with MB STAR diagnostic system.
if the Sprinter PSM (Parameterizable
special module) had not been installed. SCN coding should be applied together with MB STAR diagnostic system.
PSM Coding can be achieved via both online
and offline, here is the instruction of offline coding.
and offline, here is the instruction of offline coding.
Tool needed:
DAS Offline SCN coding service software
A Dell D630 laptop for Dell format HDD
NOTE:
Our Offline SCN Coding service is valid for
MB STAR diagnostic software HDD 2013.* to 2014.7 version.
MB STAR diagnostic software HDD 2013.* to 2014.7 version.
After download the software, provide your ID
to us, we will calculate the key for you.
to us, we will calculate the key for you.
PSM online SCN
Coding Instruction:
Coding Instruction:
Well install Star diagnosis software
Connect MB SD Connect C4 diagnostic system
with vehicle
with vehicle
Start DAS program
Run a Quick Test
Come to EIS
(electronic ignition starter switch) control unit
(electronic ignition starter switch) control unit
Select “Control unit
adaptation” and
press F3 button
adaptation” and
press F3 button
Select “SCN Coding” option
Select
“Perform SCN coding”
“Perform SCN coding”
Select
“Offline” menu item (no networked Star Diagnosis device)
“Offline” menu item (no networked Star Diagnosis device)
Confirm
“Determine vehicle data for offline SCN coding from the vehicle” with F3
“Determine vehicle data for offline SCN coding from the vehicle” with F3
Fill out
the fax form completely and print with “F11”
the fax form completely and print with “F11”
If an
e-mail address is indicated on the fax form, SCN coding will be sent via
e-mail. If a fax number is indicated on the fax form, SCN coding data will be
sent via fax.
e-mail address is indicated on the fax form, SCN coding will be sent via
e-mail. If a fax number is indicated on the fax form, SCN coding data will be
sent via fax.
Before
sending the fax form to the Star Diagnosis Help Desk, the appropriate control unit must be added in VeDoc to
the vehicle equipment list.
sending the fax form to the Star Diagnosis Help Desk, the appropriate control unit must be added in VeDoc to
the vehicle equipment list.
After
you open VeDoc, start the program by clicking on “Start”
you open VeDoc, start the program by clicking on “Start”
Then enter the VIN
in the “Search” field
in the “Search” field
Once the
vehicle has been found in the system (the VIN will be shown in the top right),
go to the “Codes” field
vehicle has been found in the system (the VIN will be shown in the top right),
go to the “Codes” field
Under
“Add”, the installation code “ED5” (parameterizable special module) is added to
the equipment list
“Add”, the installation code “ED5” (parameterizable special module) is added to
the equipment list
Print
out and send the fax form to the indicated Star Diagnosis Help Desk fax number.
out and send the fax form to the indicated Star Diagnosis Help Desk fax number.
Perform
SCN coding after you receive the coding data Please enter the coding string
line by line
SCN coding after you receive the coding data Please enter the coding string
line by line
In the MB STAR DAS (Diagnosis Assistance System), select the menu item “Step 2: perform
SCN coding”. Continue with “F3”.
SCN coding”. Continue with “F3”.
Select
keyboard entry with “F4”
keyboard entry with “F4”
Enter
the SCN coding data in DAS manually
the SCN coding data in DAS manually
Switch
the ignition on and off (Depends on control unit, see specification in DAS)
the ignition on and off (Depends on control unit, see specification in DAS)
Print
out the order log with “F11” and enclose with the repair order
out the order log with “F11” and enclose with the repair order
PSM offline SCN
coding is finished
coding is finished
This is from obd tool website
technical support: Benz Sprinter MB STAR diagnosis PSM Offline SCN coding
technical support: Benz Sprinter MB STAR diagnosis PSM Offline SCN coding